4-12 DBS 576 (USA) issued September 2001 576-50-700
Chapter 4. User Maintenance Section 700 - Operation
Table 4-2. Exception Days
Hardware Requirements
•N/A
Related Programming
•N/A
Considerations
•N/A
11. To set additional Exception Day modes, press the volume
up or down key or press the HOLD key to move to the
desired mode.
Desired Exception Day mode displays
12. Repeat steps 7-11 until all Exception Day modes are set.
(Up to 6 exception periods may be specified.)
Note: The entry positions are listed in Table 2 on page 4-
12.
13. Press the AUTO key to exit the entry mode. 2-
Mode Except Day displays
14. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.
81-
User MAINT displays
OR...
ON/OFF LED goes off
Action Result
8107-2 (200-211) Hold (MMDD) Hold
200=Start - Exception Day 1
201=End - “ “
202=Start - Exception Day 2
203=End - “ “
204=Start - Exception Day 3
205=End - “ “
206=Start - Exception Day 4
207=End - “ “
208=Start - Exception Day 5
209=End - “ “
210=Start - Exception Day 6
211=End - “ “
EXCEPTION DAYS:
Month/Day of Exception Days
(Start or End)