Panasonic DBS-576HD - Floating Hold; System Hold

Section 700 - Operation Chapter 6. DSLT Features
576-50-700 DBS 576 (USA) issued September 2001 6-17
• System Hold
• Floating Hold
• Exclusive Hold
• Broker’s Hold
• Call Park (Station)
System Hold
You can place either an outside or intercom call on System Hold. You can retrieve a call placed on
System Hold from any extension that has a line appearance for the held call.
Operation
To place a call on System Hold:
To retrieve a call placed on System Hold:
To retrieve a held call on a specific trunk:
Hardware Requirements
•N/A
Related Programming
• FF1-0-01: Floating Hold by HOLD Key
• FF1-0-03: Extension COS (Hold Key Operation)
• FF3: Extension COS
Considerations
•N/A
Floating Hold
Floating Hold is a type of System Hold that allows you to retrieve a held call from any extension by
dialing the Floating Hold orbit number for the held call.
Action Result
1. While on a call, press the HOLD key. Intercom dial tone
Action Result
1. Press the HOLD key. Intercom dial tone
Action Result
1. Lift the handset or press the ON/OFF key. Intercom dial tone
2. Enter the Specified Trunk Answer code (default = *0).
3. Enter the trunk number.