Section 700 - Operation Chapter 6. DSLT Features
576-50-700 DBS 576 (USA) issued September 2001 6-23
Extension Direct Pickup
Extension Direct Pickup allows you to answer a call to another extension by dialing the number of the
ringing extension.
Operation
To use Extension Direct Pickup:
Hardware Requirements
•N/A
Related Programming
• FF1-0-02: Intercom Voice Call Pickup
• FF1-2: Dial Plan
Considerations
•N/A
Trunk Group Pickup
Trunk Group Pickup allows you to answer calls ringing to any extension within your own MCO
incoming trunk group.
Operation
To use Trunk Group Pickup:
Hardware Requirements
•N/A
Action Result
1. Lift the handset or press the ON/OFF key. Intercom dial tone
2. Enter the Extension Direct Call Pickup code (default = 704).
3. Dial the number of the ringing extension.
4. Complete the call and replace the handset or press the ON/
OFF key.
Action Result
1. Lift the handset or press the ON/OFF key. Intercom dial tone
2. Enter the Trunk Group Pickup code (default = 709).
3. Complete the call and replace the handset or press the ON/
OFF key.
To Next Page