Panasonic DBS-576HD - Call Forwarding and Do-Not-Disturb

7-12 DBS 576 (USA) issued September 2001 576-50-700
Chapter 7. SLT Features Section 700 - Operation
To cancel Call Forwarding - No Answer:
Call Forwarding and Do-Not-Disturb
The System allows you to cancel both Call Forwarding and Do-Not-Disturb (DND) for your own
extension in one step.
To cancel Call Forwarding and DND:
Hardware Requirements
•N/A
Related Programming
• FF1-0-03: Extension COS (Call Forward/All Calls)
• FF1-0-03: Extension COS (Call Forward/Busy)
• FF1-0-03: Extension COS (Call Forward/No Answer)
• FF1-0-03: Extension COS (Call Forward/Other)
4. Dial the destination number:
• If forwarding to another extension, dial the extension
number.
• If forwarding to an outside number, press the # key then
enter the SSD bin number.
Note: Any outside number used for Call Forwarding must
already be programed into speed dialing. (For instructions,
see “Speed Dialing” on page 276.)
5. Replace the handset.
Action Result
1. Lift the handset. Intercom dial tone
2. Enter the appropriate Cancel Call Forwarding code:
• For your extension, enter 733.
• For another extension, enter 753.
3. If canceling Call Forwarding for another extension, dial the
extension number.
4. Replace the handset.
Action Result
1. Lift the handset. Intercom dial tone
2. Enter the CF/DND All Clear code (default = 7**).
3. Replace the handset.
Action Result