Section 700 - Operation Chapter 5. Key Telephone Features
576-50-700 DBS 576 (USA) issued September 2001 5-19
• You can set Call Forwarding - All Calls while Call Forwarding - No Answer and/or Call
Forwarding - Busy are set. Canceling one mode only affects that mode; however, the other
modes will remain set until canceled individually.
• An auto camp-on to a busy extension will forward to the Call Forward No Answer destination. A
manual camp-on to a busy extension will not forward.
• If Call Forwarding No Answer and DND are both set, calls immediately forward to the Call
Forward No Answer destination.
• You can cancel both Call Forwarding and DND by entering 7 * *.
• Beginning with Version 3.0 and higher, calls can be forwarded by an extension with an NPDN or
PNPDN if the COS gives permission. See “Directory Numbers” on page 5-36 for more
information.
Call Hold
Description
The System provides the following types of Call Hold or Call Park:
• System Hold
• Floating Hold
• Exclusive Hold
• Broker’s Hold
• Station Call Park
System Hold
You can place either an outside or intercom call on System Hold. You can retrieve a call placed on
System Hold from any extension that has a line appearance for the held call.
Operation
To place a call on System Hold:
To retrieve a call placed on System Hold from the extension that placed it there:
Action Result
1. While on a call, press the HOLD key. • Intercom dial tone
• Hold CO XXX displays (where XXX
= outside line number)
Action Result
1. Press the line key that is flashing green or press the HOLD
key if a non-appearing CO call.
CO XXX displays (where XXX = outside
line number)
To Next Page
Loading...
