Panasonic DBS-576HD - Page 273

Section 700 - Operation Chapter 6. DSLT Features
576-50-700 DBS 576 (USA) issued September 2001 6-47
To link multiple SSD numbers to a PSD bin:
To use a PSD that links multiple SSDs:
To manually link speed dials together:
Hardware Requirements
•N/A
Related Programming
•N/A
Action Result
1. Determine the SSD bin numbers to be linked
2. Lift the handset or press the ON/OFF key.
3. Enter the Speed Dial Set/Clear code (default = 710).
4. Enter the PSD bin number (80-99).
5. Press the AUTO key.
6. Enter the SSD bin number (00-79 or 000-799) that contains
the first part of the number to be called.
7. Repeat steps 5-6 up to 5 more times for all additional SSDs
to be dialed.
8. Press the HOLD key when finished.
Action Result
1. If necessary, select the trunk group (9, 81-8). (Normally the
trunk is selected by the speed dial numbers.)
2. Press the AUTO key.
3. Enter the PSD bin number (80-99).
Action Result
1. Lift the handset or press the ON/OFF key. Intercom dial tone
2. If necessary, access an outside line. Outside dial tone
3. Press the AUTO key, then enter the PSD or SSD bin num-
ber.
4. Press the AUTO key and enter the PSD or SSD codes to
dial the parts of the phone number until it is completed.