Panasonic GM1 Series

1.1 Safety Precautions
This section explains important rules that must be observed to prevent personal injury and
property damage.
●
Injuries and damages that may occur as a result of incorrect use are classified into the
following levels and safety precautions are explained according to the level.
Indicates that there is a risk of death or serious injury
Indicates that there is a risk of minor injury or property damage
Indicates an action that is prohibited
Indicates an action that must be taken
● Take safety measures outside this product to ensure the safety of the entire system even
if this product fails or an error occurs due to external factors.
● Do not use this product in atmospheres that contain flammable gases.
Doing so may result in explosion.
● Do not throw this product into the fire.
Doing so may cause the batteries or other electronic parts to explode.
● To prevent abnormal heat generation or smoke generation, use this product with some
leeway from the guaranteed characteristics and performance values of the product.
● Do not disassemble or modify this product.
Doing so may result in abnormal heat generation or smoke generation.
● Do not touch any terminals while the power is on.
Doing so may result in electrical shock.
● Configure emergency stop and interlock circuits outside this product.
● Connect wires and connectors properly.
Failure to do so may result in abnormal heat generation or smoke generation.
● Do not perform work (such as connection or removal) with the power turned on.
Doing so may result in electrical shock.
● If this product is used in any way that is not specified by Panasonic, its protection function
may be impaired.
● This product has been developed and manufactured for industrial use only.
1.1 Safety Precautions
1-2 WUME-GM1ETCSU-01