Panasonic GM1 Series

4.1 Power ON
When turning ON the power to the system incorporating the GM1 Controller
, follow the power
ON sequence described in the procedure below.
● Consider the performance and statuses of any external devices connected to the system,
and take suf
ficient care so that turning ON the power will not initiate unexpected
movements.
1. T
urn ON the power to the I/O devices connected to the GM1 Controller.
2. Turn ON the power to the servo amplifier.
3. Turn ON the power to the GM1 Controller.
4.1 Power ON
4-2 WUME-GM1ETCSU-01