6.5 Other Functions
6.5.1 Display Language Setting Function
This function allows the user to change the display language setting for GM Programmer.
The default setting is the same language as the one used in the operating system. If you want
to use a dif
ferent language from the one used in the operating system, change the display
language setting. After you change the language setting, you must restart GM Programmer.
1. From the menu bar
, select Tools>Options.
The "Options" dialog box will be displayed.
2. Select "International Settings" from the Categories pane.
The "International Settings" pane will be displayed.
3. Select User Interface Language>Specific language option and specify a desired
language in the field.
4. Click [OK].
The "Options" dialog box will be closed.
At this stage, the language has not been changed yet.
5. Close GM Programmer and then start GM Programmer again.
After GM Programmer is started, the selected language takes ef
fect.
6.5 Other Functions
WUME-GM1ETCSU-01 6-11
To Next Page
Loading...
