11.3 Writing Objects to Servo Amplifier
By connecting the PC and a servo amplifier
, the objects set with PANATERM Lite for GM can
be written directly to the servo amplifier.
1. Start P
ANATERM Lite for GM.
2. Click [Trans] on the toolbar.
The objects will be sent from PANATERM Lite for GM to the servo amplifier.
3. Click the [EEP] button to write the objects to the EEPROM of the servo amplifier
.
11.3 Writing Objects to Servo Amplifier
WUME-GM1ETCSU-01 11-9
To Next Page
Loading...
