Panasonic GM1 Series

11.2 Writing Parameters to Servo Amplifier
By connecting the PC and a servo amplifier
, the parameters set with PANATERM Lite for GM
can be written directly to the servo amplifier.
1. Start P
ANATERM Lite for GM.
2. Click "Trans" on the toolbar.
The parameters will be sent from PANATERM Lite for GM to the servo amplifier.
● If you have changed parameters on a yellow background, click "EEP" on the toolbar to restart
the servo amplifier
.
11.2 Writing Parameters to Servo Amplifier
11-8 WUME-GM1ETCSU-01