6.3.2 How to quit
● Before closing GM Programmer, be sure to save any project files that you are editing and
must save.
1. From the menu bar
, select File>Exit.
If changes have not been saved, the following window will be displayed.
If exiting without saving, select [No].
If changes need to be saved, select [Yes] to perform the save process.
2. Click the [Y
es] button.
GM Programmer will be closed.
● You can also close GM Programmer by clicking the [×] button on the title bar.
6.3 Basic Operations
WUME-GM1ETCSU-01 6-9
To Next Page
Loading...
