Panasonic KV-S1025C SERIES - Page 52

52
8.3.7. Lamp Drive Board (B): Available only for KV-S1025C Series
8.3.8. Optical Unit (B): Available only for KV-S1025C Series
(1) Remove the Top Cover. (See 8.2.6.)
(2) Remove the screw.
(3) Disconnect the 2 connectors.
(4) Remove the Lamp Drive Board (B), paying attention to the
2 Claws supporting the board.
(1) Remove the Top Cover. (See 8.2.6.)
(2) Release 2 clamps securing the wires.
(3) Disconnect the connector to the CCD Board (B).
(4) Remove the 2 screws.
(5) While leaning the unit forward in the direction of the
arrow (1), pull out the Optical Unit (B) backward in the
direction of the arrow (2).