Panasonic KX-TA308 - Doorbell;Door Chime

3-58 Features
D 3 Features
Doorbell/Door Chime
Description Extension users can receive not only ringing but also chiming as a
doorphone call by connecting a doorbell/door chime to the relay
connected with a door opener, when a visitor presses a doorphone
button. They can recognize which doorphone call is coming by
assigning a chime pattern (8 patterns) to each doorphone. Also they
can select the ringing way (Ring/Chime/Ring & Chime) for each
doorphone.
Conditions • <Example>
—
Taking the example that a doorbell/door chime is connected to Relay 2.
When only an extension connected to jack 01 can receive a doorphone
call, each setting is as follows:
When default values are changed as shown in the above table, the
system behaves in the following way:
— When a visitor presses the button of Doorphone 1:
• A doorbell/door chime, connected to Relay 2, chimes with Pattern
1.
• Extension 101 does not ring by setting “Doorphone 1: Chime” in
program [710].
• The INTERCOM button of Extension 101 flashes for 30 seconds.
(PT only)
• During 30 seconds, the extension user can answer the doorphone
call at Extension 101 by going off-hook. And then he or she can
unlock Door Opener 1, connected to Relay 1, by pressing “5”.
• While having another call, the displayed item flashes when the
Call Waiting feature is programmed.
Programming
[700]-[702] Doorphone Ringing
Assignment — Day/Night/Lunch
[703]-[705] Door Opener
Assignment — Day/Night/Lunch
[708] Doorphone Ringing Time
[710] Doorphone Ring/Chime
Selection
[711] Doorphone Chime
Assignment
[712] Doorphone Chime Pattern
Selection
Default Change
All jacks: Enable
All jacks: Enable
All doorphones: 15 s
All doorphones: Ring
All doorphones:
Relay 2
All doorphones:
Pattern 1
Jack 01: Enable
Others: Disable
Jack 01: Enable
Others: Disable
All doorphones: 30 s
All doorphones: Chime
All doorphones:
Relay 2
Doorphone 1: Pattern 1
Doorphone 2: Pattern 2