4.2 System Programming
Common Area Call Log Check Assignment
System Programming 4-135
Description Enables or disables checking call logs stored in the common area. If
enabled, the Caller ID Indication — Common button and Caller ID
Selection — Common button can be assigned.
Selection • Jack number: 01 – 08, ( = all jacks)
• Disable / Enable
Default All jacks – Enable
Programming 1. Enter 909.
Display: Call Log Assign
2. Press NEXT.
Display: Jack NO? →
3. Enter a jack number.
Pressing NEXT also can enter jack number 01.
Display example: #01:Enable
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another jack, press NEXT or PREV, or
SELECT and enter the desired jack number.
7. Repeat steps 4 through 6.
8. Press END.
Condition • To assign all jacks to the same selection, press the key in step 3. In
this case, the display will show: # :Mixed.
Feature Reference Section 3, Features
Call Log, Incoming
909
To Next Page
Loading...
