System Programming 4-127
4.2 System Programming
Caller ID Assignment
900
Description Enables or disables the Caller ID feature for outside (CO) lines
which have contracted the Caller ID Service by a Central Office.
Selection • Outside (CO) line number: 1 – 3, ( = all outside (CO) lines)
• Enable / Disable
Default All outside (CO) lines – Enable
Programming 1. Enter 900.
Display: CID Assign
2. Press NEXT.
Display: CO NO? →
3. Enter an outside (CO) line number.
Pressing NEXT also can enter outside (CO) line number 1.
Display example: CO 1:Disable
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another outside (CO) line, press NEXT or
PREV, or SELECT and enter the desired outside (CO) line
number.
7. Repeat steps 4 through 6.
8. Press END.
Conditions • To assign all outside (CO) lines to the same selection, press the key
in step 3. In this case, the display will show: CO :Mixed.
Feature Reference Section 3, Features
Caller ID
To Next Page
Loading...
