4.2 System Programming
Paralleled Telephone Connection
4-104 System Programming
Description A Paralleled Telephone Connection allows a single line telephone
to be connected to the same jack as a proprietary telephone. This
program assigns which jacks can perform the paralleled telephone
connection feature.
Selection • Jack number: 01 – 08, ( = all jacks)
• Disable / Enable
Default All jacks – Disable
Programming 1. Enter 610.
Display: Parallel Connect
2. Press NEXT.
Display: Jack NO? →
3. Enter a jack number.
Pressing NEXT also can enter jack number 01.
Display example: #01:Disable
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another jack, press NEXT or PREV, or
SELECT and enter the desired jack number.
7. Repeat steps 4 through 6.
8. Press END.
Condition • To assign all jacks to the same selection, press the key in step 3. In
this case, the display will show: # :Mixed.
Feature Reference Section 3, Features
Paralleled Telephone
610
To Next Page
Loading...
