Features 3-81
3 Features L
Line Preference – Outgoing (Idle Line/No Line/Prime Line)
Description A proprietary telephone user can select a desired outgoing line
preference to originate calls from the following three line
preferences.
(1) Idle Line Preference:
When the user goes off-hook, they are connected to an idle line.
An idle line is automatically selected from the pre-assigned
lines.
(2) No Line Preference:
No line is selected when the user goes off-hook. They must
select a line to make a call.
(3) Prime Line Preference:
When the user goes off-hook, they are connected to the pre-
assigned line. Assign a prime line beforehand.
Conditions • Setting a new line preference feature will cancel the previous setting.
• To set Prime Line Preference, select one prime line from the outside
(CO) lines.
• The outside (CO) lines to be used must be programmed.
• To select Idle Line Preference, the outside (CO) lines available should
be programmed. Also, the outside (CO) lines available for Automatic
Line Access should be assigned.
• The user can override the Idle/Prime Line Preference temporarily to
select a specific line. To select it, press the desired line access button
(INTERCOM or CO button) before going off-hook or pressing the
SP-PHONE/MONITOR button.
Programming References
Section 4, System Programming
[400] Outside (CO) Line Connection Assignment
[405]–[407] Flexible Outward Dialing Assignment — Day/Night/Lunch
[419] Automatic Designated Outside (CO) Line Access
Station Programming . . . . . . . . . User Manual
Flexible Button Assignment – Group-CO (G-CO) Button,
Other-CO (O-CO) Button,
Single-CO (S-CO) Button
Preferred Line Assignment – Outgoing
Feature Reference Section 3, Features
Outside (CO) Line Connection Assignment – Outgoing
Operation Reference Basic Operation
— User Manual
Making Calls
To Next Page
Loading...
