4-114 System Programming
4.2 System Programming
Door Opener Time
709
Description Selects the door opener time. The door is unlocked for the assigned
period of time.
Selection • Door Opener number: 1 – 2, ( = all door openers)
• 1 sec / 2 sec / 3 sec / 4 sec / 5 sec / 6 sec / 7 sec / 8 sec (seconds)
Default All door openers — 5 sec
Programming 1. Enter 709.
Display: Door-Opener Time
2. Press NEXT.
Display: Door NO? →
3. Enter a door opener number.
Pressing NEXT also can enter doorphone number 1.
Display example: DP-1: 5 sec
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another door opener, press NEXT or PREV, or
SELECT and enter the desired door opener number.
7. Repeat steps 4 through 6.
8. Press END.
Condition • To assign all door openers to the same selection, press the key in
step 3. In this case, the display will show: DP- :Mixed.
Feature Reference Section 3, Features
Door Opener
To Next Page
Loading...
