4.2 System Programming
Operator Assignment
4-18 System Programming
008
Description Assigns the jack number for the operator. The operator has the
ability to perform operator services.
Selection Jack number: 01 – 08 / Disable (no operator)
Default Jack-01
Programming 1. Enter 008.
Display: Operator Ext
2. Press NEXT.
Display example: OPT :Jack-01
3. Enter a jack number.
To assign no operator, press CLEAR.
To change the current entry, press CLEAR and enter the new jack
number.
4. Press STORE.
5. Press END.
Conditions None
Feature Reference Section 3, Features
Operator
To Next Page
Loading...
