3-56 Features
D 3 Features
Do Not Disturb (DND) Override
Description Allows a pre-assigned extension user to call another user who has
set the Do Not Disturb feature. Dialing “2” enables the caller to
override DND programmed on the called extension’s telephone and
forces the telephone to ring.
Condition • System programming determines which extension users can perform
DND Override.
Programming Reference
Section 4, System Programming
[609] Do Not Disturb Override
Feature Reference
Section 3, Features
Do Not Disturb (DND)
Operation Reference Telephone Features
— User Manual Do Not Disturb (DND) Override
Do Not Disturb (DND)
Description Allows an extension user to appear busy to incoming outside or
intercom calls. This can be set or canceled by the extension user.
Conditions • If a proprietary telephone (PT) is not supplied with the FWD/DND
button, it can be assigned to a flexible CO button.
• DND does not work for the following calls: hold recalls or the Timed
Reminder alarm.
• A PT user in DND mode can answer a call by pressing the
corresponding flashing button.
• An extension in DND mode can be called by other extension users who
are allowed to override DND in program [609] “Do Not Disturb
Override”.
• If the Call Forwarding feature has already been set, setting the DND
feature will cancel Call Forwarding.
Programming Reference
Station Programming . . . . . . . . . User Manual
Flexible Button Assignment – FWD/DND Button
Feature Reference Section 3, Features
Do Not Disturb (DND) Override
Operation Reference Telephone Features
— User Manual Do Not Disturb (DND)
To Next Page
Loading...
