4.2 System Programming
Caller ID SMDR Format
4-132 System Programming
Description Selects whether a Caller ID number is printed out or not on the
SMDR.
Selection Without CID (not printed) / With CID (printed)
Default With CID
Programming 1. Enter 906.
Display: CID SMDR Format
2. Press NEXT.
Display example: With CID
3. Keep pressing SELECT until the desired selection is
displayed.
4. Press STORE.
5. Press END.
Condition • Even if a name is also sent by the Caller ID service, only the number is
printed.
Feature References Section 3, Features
Caller ID
Station Message Detail Recording (SMDR)
906
To Next Page
Loading...
