4.2 System Programming
Hold Music Selection
System Programming 4-31
111
Description Used to determine the music source use for Music on Hold for
outside calls.
Selection External / Tone
Default External
Programming 1. Enter 111.
Display: Hold Music
2. Press NEXT.
Display example:External
3. Keep pressing SELECT until the desired selection is
displayed.
4. Press STORE.
5. Press END.
Conditions • The external music source is a user-supplied item. One music source can
be installed.
• If “Tone” is assigned, the following cyclic tone is sent to the held
outside (CO) line.
Feature Reference Section 3, Features
Music on Hold
To Next Page
Loading...
