4-50 System Programming
4.2 System Programming
Toll Restriction — Exception Codes
306
Description This allows the user to assign numbers which are exceptions to toll
restriction specified in programs [302] – [305].
Selection • Code number: 01 – 80
• Exception number: 11 digits
Default All codes – Not stored
Programming 1. Enter 306.
Display: Excepted Table
2. Press NEXT.
Display: CODE NO?→
3. Enter a code number.
Pressing NEXT also can enter code number 01.
Display example: 01: ...........
4. Enter an exception number.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and enter the new
number.
5. Press STORE.
6. To program another code, press NEXT or PREV, or
SELECT and enter the desired code number.
7. Repeat steps 4 through 6.
8. Press END.
Conditions • There is a maximum of eighty numbers. Each number must have eleven
digits, consisting of 0 – 9, , # and x (PAUSE button). The character
“x” can be used as a wild card character and is entered by pressing the
PAUSE button.
• Code numbers 01 – 80 apply to COS number 2, 01 – 60 apply to COS
number 3, 01 – 40 apply to COS number 4, and 01 – 20 apply to COS
number 5.
Feature Reference Section 3, Features
Toll Restriction
To Next Page
Loading...
