2.8 System Restart
2-30 Installation
After starting the system, if the system does not operate properly,
restart the system.
Before restarting the system, try the system feature again to confirm
whether there definitely is a problem or not.
System Restart causes the following.
1. Camp-on is cleared.
2. Calls on Hold are terminated.
3. Calls on Exclusive Hold are terminated.
4. Calls in progress are terminated.
5. Call Park is cleared.
6. Last Number Redial is cleared.
7. Saved Number Redial is cleared.
8. Message Waiting is cleared.
Other data is not cleared by System Restart.
1. Turn the Power switch off and then on.
Notice If the system still does not operate properly, please see Section 2.9,
“System Data Clear”.
To Next Page
Loading...
