4-142 System Programming
4.2 System Programming
System Data Clear
999
Description Clears the system data which have been programmed. The system
will re-start with the default settings.
Selection All Para / System Para / CO Para + outside (CO) line number:
1 – 3, ( = all outside (CO) lines) /
Ext Para + jack number: 01 – 08, ( = all jacks) / Speed Dial
Programming 1. Enter 999.
Display: System Clear
2. Press NEXT.
Display: Menu:All Para
3. Keep pressing SELECT until the desired selection is
displayed.
4. Press STORE.
5. If CO Para or Ext Para is selected, enter an outside (CO) line
or jack number.
6. Press STORE.
7. Press END.
Condition • Please refer to program [804] for each parameter.
Feature Reference Section 3, Features
System Data Default Set
To Next Page
Loading...
