Panasonic KX-TD500 - Page 90

Station Programming
90 User Manual
No Line Preference — Incoming (Assignment)
No line is selected when you go off-hook to answer a call. You must select a line to answer an
incoming call.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
Ringing Line Preference — Incoming (Assignment)
You are connected to a call ringing on your extension automatically, when you go off-hook to
answer a call.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
PT
Dial 1.
Press STORE.
Dial 2.
1
2
AUTO DIAL
STORE
The STORE indicator lights.
The display shows the initial
programming mode.
The display shows the current
status.
<PT Display Example>
Pref.In :No
PT
Dial 2.
Press STORE.
Dial 2.
2 2
AUTO DIAL
STORE
The STORE indicator lights.
The display shows the initial
programming mode.
The display shows the current
status.
<PT Display Example>
Pref.In :Ring