Panasonic KX-TDA50

Feature
Default
Pattern 1
(with )
Pattern 2
(without )
KX-TDA50/
KX-TDA100/
KX-TDA200
KX-TDA600
Extension Dial Lock set/cancel
77 77 77
Time Service Switch 780 780 780
Remote Extension Dial Lock off 782 782 782
Remote Extension Dial Lock on
783 783 783
NDSS Monitor Release (Centralized
BLF Monitor Cancel)
784 784 784
Extension Feature Clear
790 790 790
Extension Personal Identification
Number (PIN) set/cancel
799 799 799
Dial Information (CTI) None None None
Other PBX Extension Number (TIE)
01–16
None None None
Quick Dialing 1–80
*1
None None None
*1
It is possible to register Quick Dialing numbers that overlap with other registered numbers. This is used for the Automatic
Rerouting of VoIP Calls To Public CO Line feature.
2. Flexible Numbering (available while a busy, DND, or ringback tone is heard)
Feature
numbers which are available while a busy, DND, or ringback tone is heard can be customized for
easy use. The numbers should be one digit (0-9, "
", or "#")
and must not conflict. For a list of the default
settings, refer to the following table:
[Flexible Numbering Table (available while a busy, DND, or ringback tone is heard)]
Feature Default
Call Waiting/DND Override 1 or 2
*1
Executive Busy Override 3
Message Waiting set 4
Call Monitor 5
Automatic Callback Busy 6
Alternate Calling—Ring/Voice
*1
To use Call Waiting/DND Override, both
"1" and "2" are available by default.
3. Fixed Numbering (available while dialing or talking)
Features which are available while dialing or talking have fixed numbers, as shown in the following table:
116 Feature Manual Document Version 2010-11
6.1.4 Flexible Numbering/Fixed Numbering