4. Focus and Shutter (Drive Mode) Settings
126
10 Touch [ ] to end the recording.
•
It can also be ended by selecting [Time Lapse/Animation]
from the [Rec] menu and then pressing [MENU/SET].
• When [Auto Shooting] is set to [ON], select [End] on the
confirmation screen.
(If [Pause] has been selected, press the shutter button fully
to resume the recording.)
• Confirmation screen is displayed. It is ended when [Yes] is selected.
• Confirmation screen for creating a motion picture is displayed next, so select [Yes].
11 Select the methods for creating a motion picture.
•
The recording format is set to [MP4].
12 Press 3/4 to select [OK] and then press [MENU/
SET].
•
Confirmation screen is displayed. It is executed when [Yes]
is selected.
• Motion pictures can also be created from [Stop Motion
Video] in the [Playback] menu. (P243)
[Rec Quality]
Sets the quality of a motion picture.
• When [System Frequency] is set to [59.94 Hz (NTSC)]
[4K/30p]/[FHD/60p]/[FHD/30p]/[HD/30p]/[VGA/30p]
•
When [System Frequency] is set to [50.00 Hz (PAL)]
[4K/25p]/[FHD/50p]/[FHD/25p]/[HD/25p]/[VGA/25p]
[Frame Rate]
Sets the number of frames per second.
The larger the number is, the smoother the motion picture will be.
• When [System Frequency] is set to [59.94 Hz (NTSC)]
[60fps]
¢
/[30fps]/[15fps]/[10fps]/[7.5fps]/[6fps]/[3fps]/[1fps]
•
When [System Frequency] is set to [50.00 Hz (PAL)]
[50fps]
¢
/[25fps]/[12.5fps]/[8.3fps]/[6.25fps]/[5fps]/[2.5fps]/[1fps]
¢ Only when set to [FHD/60p]/[FHD/50p]
[Sequence]
[NORMAL]:
Splices pictures together in recording order.
[REVERSE]:
Splices pictures together in reverse recording order.
To Next Page
Loading...
