131
Image and Picture Quality Settings
¢ Displayed only when [Monochrome] is selected.
• Registered settings are memorised even if the camera is turned off.
• If you adjust the picture quality, [_] is displayed beside the Photo Style icon on the screen.
• Colour can be changed by [Saturation] when [Monochrome] is selected.
3 Press [MENU/SET].
∫ Registering settings to [Custom]
Adjust the picture quality following step
2 of “Adjusting the picture quality”, and
then press
[DISP.].
• Confirmation screen is displayed. It is executed when [Yes] is selected.
Item Effect
[Contrast]
[r]
Increases the difference between the brightness and the
darkness in the picture.
[s]
Decreases the difference between the brightness and the
darkness in the picture.
[Sharpness]
[r] The picture is sharply defined.
[s] The picture is softly focused.
[Saturation]
[r] The colours in the picture become vivid.
[s] The colours in the picture become natural.
[Noise Reduction]
[r]
The noise reduction effect is enhanced. Picture
resolution may deteriorate slightly.
[s]
The noise reduction effect is reduced. You can obtain
pictures with higher resolution.
[Filter Effect]
¢
[Yellow]
Enhances the contrast of an subject. (Effect: Weak)
The blue sky can be recorded clearly.
[Orange]
Enhances the contrast of an subject. (Effect: Medium)
The blue sky can be recorded in darker blue.
[Red]
Enhances the contrast of an subject. (Effect: Strong)
The blue sky can be recorded in much darker blue.
[Green]
The skin and lips of people and green leaves appear
in natural tones. Green leaves appear brighter and
more enhanced.
[Off] -
To Next Page
Loading...
