171
Focus and Exposure Settings
Easily Optimising the Brightness for a Specified
Area
(Touch AE)
Applicable modes:
You can easily optimise the brightness for a touched position. When the face of the subject
appears dark, you can brighten the screen according to the brightness of the face.
You can optimise just the brightness for a touched position or by optimising the brightness
when using Touch AF, you can optimise both the focus and brightness for the touched
position.
∫ Cancelling the Touch AE function
Touch [ ].
•
[Metering Mode] returns to the original setting, and the brightness optimisation position is
cancelled.
Not available in these cases:
•
[Touch AE] is not available in the following cases.
– When using the Digital Zoom.
– When [Touch AF] in [Touch Settings] of the [Custom] menu has been set to [AF+AE]. (P172)
Optimising only the brightness for a touched position
1
Touch [ ].
2
Touch [ ].
• The setting screen for the brightness optimisation position
is displayed.
• [Metering Mode] is set to [ ], which is used exclusively
for the Touch AE.
3
Touch the subject you want to optimise the
brightness for.
• Touching [Reset] will bring the brightness optimisation
position back to the centre.
4
Touch [Set].
AE
To Next Page
Loading...
