202
Functions Customised for Various Subjects and Purposes
Recording Profiles of Babies and Pets on Images
Applicable modes:
By setting the name and birthday of your baby or pet in advance, you can record their
name and age in months and years on images.
You can display them during playback or stamp them on recorded images using [Text
Stamp] (P251).
∫ Setting [Age] or [Name]
1 Select the menu.
Settings: [ ] ([Baby1])/[ ] ([Baby2])/[ ] ([Pet])/[OFF]/[SET]
2 Press 3/4 to select [SET] and then press [MENU/SET].
3 Press 3/4 to select [Baby1], [Baby2] or [Pet] and then press [MENU/SET].
4 Press 3/4 to select [Age] or [Name] and then press
[MENU/SET].
5 Press 3/4 to select [SET] and then press [MENU/
SET].
6 Press 4 to select [Exit] and then press [MENU/SET] to finish.
∫ To cancel [Age] and [Name]
Select the [OFF] setting in step
1.
•
The age and name can be printed out using the “PHOTOfunSTUDIO” bundled software on the
CD-ROM (supplied).
Not available in these cases:
•
Still pictures recorded during motion picture recording ([ ] (motion picture priorities)) (P233)
will not record age or name.
[MENU] > [Rec]>[Profile Setup]
Enter [Age] (birthday)
2/1: Select the items (year/month/day)
3/4: Setting
[MENU/SET]: Set
Enter [Name]
For details on how to enter characters, refer to “Entering
Text” on P61.
To Next Page
Loading...
