92
Recording Modes
Taking Pictures by Specifying the Aperture/
Shutter Speed
Recording Mode:
Set the aperture value to a higher number when you want a sharp focus background. Set
the aperture value to a lower number when you want a soft focus background.
1
Set the mode dial to [ ].
2
Set the aperture value by rotating the rear
dial or the front dial.
A Aperture value
B Exposure meter
• It will switch between aperture setting operation and Exposure Compensation operation
every time the rear dial is pressed.
• The effects of the set aperture value will not be visible on the recording screen. To
check on the recording screen, please use [Preview]. (P97)
• The brightness of the screen and the recorded pictures may differ. Check the pictures on the
playback screen.
• Rotate the front/rear dial to display the [Expo.Meter]. Unsuitable areas of the range are
displayed in red.
• If the exposure is not adequate, the aperture value and the shutter speed turn red and blink
when the shutter button is pressed halfway.
• When using a lens having an aperture ring, set the position of the aperture ring to [A] to activate
the front/rear dial settings. At positions other than [A], the ring setting takes priority.
Aperture-Priority AE Mode
Aperture value:
Reduces
Aperture value:
Increases
It becomes easier to
defocus the
background.
It becomes easier to
maintain focus as far
as the background.
SSSS
FF
8.08.08.0
60 4
4.0 5.6 8.0 11 16
81530
To Next Page
Loading...
Need help?
General
Weight and Dimensions
