236
Motion Picture
Applicable modes:
White saturated areas appear blinking in black and white.
Settings: [ON]/[OFF]
•
If there are any white saturated areas, we recommend compensating the exposure towards
negative (P166) referring to the histogram (P73) and then taking the picture. It may result in a
better quality picture.
• Refer to P211 for details.
Applicable modes:
The shutter speed can be fixed to reduce the flicker or striping in the motion picture.
Settings: [1/50]/[1/60]/[1/100]/[1/120]/[OFF]
•
Refer to P127 for details.
[Rec Highlight]
[Ex. Tele Conv.]
[Flkr Decrease]
[Silent Operation]
To Next Page
Loading...
