219
Stabiliser, Zoom and Flash
Applicable modes:
Set the built-in flash to match the recording.
•
Open the flash.
1 Select the menu.
2 Press 3/4 to select [Flash Mode] and then press [MENU/SET].
3 Press 3/4 to select the item and then press [MENU/SET].
The flash is activated twice. The interval between the first and second flash is
longer when [ ] or [ ] is set. The subject should not move until the second
flash is activated.
Changing Flash Mode
[MENU] > [Rec]>[Flash]
Item Description of settings
‰ ([Forced Flash On]) The flash is activated every time regardless of the recording
conditions.
• Use this when your subject is back-lit or under fluorescent
light.
([Forced On/
Red-Eye])
¢
([Slow Sync.]) When taking pictures against a dark background landscape, this
feature will slow the shutter speed when the flash is activated. Dark
background landscape will appear brighter.
• Use this when you take pictures of people in front of a dark
background.
• Using a slower speed can cause motion blur. Using a tripod
can enhance your photos.
([Slow Sync./
Red-Eye])
¢
¢ It can be set only when [Wireless] in [Flash] is set to [OFF] and [Firing Mode] is set to
[TTL].
To Next Page
Loading...
