276
Wi-Fi/NFC
1 Connect to a smartphone/tablet. (P270)
2 Select [ ] on the smartphone/tablet.
3 Drag an image to send it to an SNS, etc.
•
The image is sent to a web service such as an SNS.
• The function can be assigned to the top, bottom, left or
right according to your preference.
You can acquire location information from a smartphone/tablet, and write it on images
afterwards. Refer to P247 for how to write the location information on the images recorded
by this unit.
•
Read the [Help] in the “Image App” menu for further details on how to operate.
• To change the setting or disconnect, press [Wi-Fi]. (P266)
• Caution:
Be sure to pay special attention to the privacy, the likeness rights, etc. of the subject
when you use this function. Use at your own risk.
• If you have changed the clock setting of this unit or the smartphone/tablet after [Time sync],
perform [Time sync] again.
• On the smartphone/tablet, you can set the acquisition interval of location information and check
the transfer status of location information. Refer to [Help] in the “Image App” menu for details.
• (When using “Image App” for iOS)
If you press the Home or On/Off button of a smartphone/tablet while [Rec. loc. Info] is working,
location information recording is stopped.
Not available in these cases:
•
The smartphone/tablet may fail to acquire location information in China and the border area in
the neighbouring countries of China. (As of August 2013)
Sending images in the camera to an SNS
Sending location information to the camera from a smartphone/tablet
To Next Page
Loading...
Need help?
General
Weight and Dimensions
