304
Wi-Fi/NFC
You can select the method for connecting to the device you
are using.
Select the connection method supported by your device.
Connecting from a location away from your house (direct connection)
Connection method Description of settings
[Wi-Fi Direct]
1 Set the device to Wi-Fi Direct
TM
mode.
2 Select [Wi-Fi Direct].
3 Select the device to connect to.
•
Read the operating instructions of your device for details.
[WPS Connection]
[WPS (Push-Button)]
1 Select [WPS (Push-Button)].
2 Set the device to WPS mode.
•
You can wait longer for a connection by pressing the [DISP.]
button on this unit.
[WPS (PIN code)]
1 Select [WPS (PIN code)].
2 Enter the PIN code of the device into this unit.
[Manual Connection]
Enter the SSID and password into
the device. The SSID and
password are displayed on the
connection waiting screen of this
unit.
To Next Page
Loading...
