98
Recording Modes
Applicable modes:
When the exposure setting is too bright or too dark, you can use one push AE to achieve a
suitable exposure setting.
•
The exposure meter is displayed, and the aperture and shutter speed are changed to give
a suitable exposure. Which items of the settings change will depend on the Recording
Mode.
• In the following cases, suitable exposure cannot be set. (Exposure meter is displayed)
– When the subject is extremely dark and it is not possible to achieve adequate
exposure by changing the aperture value or shutter speed
– When recording using the flash
– In Preview Mode (P97)
– When using a lens that includes an aperture ring
• In Programme AE Mode, Programme Shift can be cancelled by pressing the function button to
which [One Push AE] has been set.
Easily set aperture/shutter speed for suitable exposure (One Push AE)
How to tell if the exposure is not adequate
•
If the aperture values and shutter speed blink red A when
the shutter button is pressed halfway.
• If the Manual Exposure Assistance is anything other than
when in Manual Exposure mode. For more details on
Manual Exposure Assistance, refer to P95.
1 Set a function button to [One Push AE]. (P47)
•
The following step is an example in which [One Push AE] is assigned to [Fn1].
2 (When exposure is not adequate) Press [Fn1].
Recording Mode Settings that change
Aperture value
Shutter speed
Aperture value/Shutter speed
2
00
8000800080001.71.71.7
00
-
3
-
3
2
00
8000
80001.7
1.7
00
-
3
-
3
989898
2
00
SSSSSS
F
15 250
4.0 5.6 8.0
1256030
2.82.0
6060603.5
0
To Next Page
Loading...
