259
Playback/Editing
This mode allows you to automatically display pictures vertically if they were recorded
holding the camera vertically or rotate pictures manually in 90o steps.
•
The [Rotate] function is disabled when [Rotate Disp.] is set to [OFF].
1 Select the menu.
2 Press 2/1 to select the picture and then press [MENU/SET].
•
The [Rotate] function is disabled for Group Pictures.
3 Press 3/4 to select the direction to rotate the
picture and then press [MENU/SET].
:
The picture rotates clockwise in steps of 90o.
:
The picture rotates counter-clockwise in steps of 90o.
•
Exit the menu after it is set.
Select the menu.
•
The pictures are displayed without being rotated when you select [OFF].
• Exit the menu after it is set.
Not available in these cases:
•
When you play back pictures on a PC, they cannot be displayed in the rotated direction unless
the OS or software is compatible with Exif. Exif is a file format for still pictures which allows
recording information etc. to be added. It was established by “JEITA (Japan Electronics and
Information Technology Industries Association)”.
• [Rotate Disp.] may not work on a screen that plays back multiple pictures, such as the one
displayed after [Delete Multi] is selected.
[Rotate]/[Rotate Disp.]
[Rotate] (The picture is rotated manually)
[MENU] > [Playback]>[Rotate]
[Rotate Disp.] (The picture is automatically rotated and displayed)
[MENU] > [Playback]>[Rotate Disp.]>[ON]
To Next Page
Loading...
Need help?
General
Weight and Dimensions
