63
Basic
Using the Viewfinder
∫ Using the eye sensor to switch between the Monitor and Viewfinder
When [LVF/Monitor Auto] of [Eye Sensor] (P63) in the
[Custom] menu is set to [ON] and your eye or an object is
brought close to the viewfinder, the display automatically
switches to the viewfinder display.
A Eye sensor
B [LVF]/[Fn4] button
• Eye sensor might not work properly depending on the shape of your eyeglasses, the way you
hold the camera, or bright light shining around the eyepiece. Switch manually in that case.
• During motion picture playback or a slideshow, the camera does not automatically switch the
display to the Viewfinder with the eye sensor.
Setting the eye sensor sensitivity and the automatic switching of the display
between the Monitor and Viewfinder
∫ Switching the Monitor/Viewfinder manually
Press [LVF].
The Viewfinder lights only when your eye or an object is moved closer to it.
∫ Diopter adjustment
Slide the diopter adjustment lever so that the
characters displayed in the viewfinder can be
seen clearly.
Switching the Monitor/Viewfinder
[MENU] > [Custom]>[Eye Sensor]
Item
Settings
[Sensitivity] This will set the sensitivity of the eye sensor.
[HIGH]/[LOW]
[LVF/Monitor
Auto]
This will set whether to automatically switch the display from the Monitor to
the Viewfinder when your eye or an object is brought closer to the eye sensor.
[ON]/[OFF]
[LVF]/[Fn4] button can be used in two ways, as [LVF] or as [Fn4] (function 4). At the
time of purchase, it is initially set to [LVF/Monitor Switch].
•
Refer to P47 for details about the function button.
ロヷョバョㄏフ
To Next Page
Loading...
Need help?
General
Weight and Dimensions
