223
Stabiliser, Zoom and Flash
Applicable modes:
Adjust the flash brightness when pictures taken with the flash are over or underexposed.
1 Select the menu.
2 Press 3/4 to select [Flash Adjust.] and then press [MENU/SET].
3 Press 2/1 to set the flash output and then press [MENU/SET].
•
You can adjust from [j3 EV] to [i3 EV] in steps of [1/3 EV].
• Select [n0] to return to the original flash output.
• [i] or [j] is displayed on the flash icon in the screen when the flash level is adjusted.
• It can be set only when [Wireless] in [Flash] is set to [OFF] and [Firing Mode] is set to [TTL].
(P224)
• The [Flash Adjust.] setting also applies to an external flash. (excluding the wireless flash)
(P331)
Applicable modes:
When [Auto Exposure Comp.] in [Flash] in the [Rec] menu is set to [ON], the brightness of
the built-in flash will automatically be set to the level appropriate to the selected Exposure
Compensation.
•
For details on Exposure Compensation, refer to P166.
• The [Auto Exposure Comp.] setting also applies to an external flash. (P331)
Adjust the flash output
[MENU] > [Rec]>[Flash]
Synchronising the output of the built-in flash to the Exposure
Compensation
To Next Page
Loading...
