269
Wi-Fi/NFC
Controlling with a Smartphone/Tablet
You can remotely operate the camera using a
smartphone/tablet.
You need to install “Panasonic Image App” (referred to
as “Image App” from this point on) on your
smartphone/tablet.
The “Image App” is an application provided by Panasonic.
•
Use the latest version.
• The service may not be able to be used properly depending on the type of smartphone/tablet
being used. For information on the Image App, refer to the support site below.
http://panasonic.jp/support/global/cs/dsc/
(This Site is English only.)
• When downloading the app on a mobile network, high packet communication fees may be
incurred depending on the details of your contract.
¢ Connecting to this unit with [Wi-Fi Direct] requires Android OS 4.0 or higher and Wi-Fi
Direct
TM
support.
Installing the smartphone/tablet app “Panasonic Image App”
For Android
TM
apps For iOS apps
OS Android 2.2~Android 4.2
¢
iOS 5.0~iOS 6.1
Installation
procedure
1 Connect your Android device
to a network.
2 Select “Google Play
TM
Store”.
3 Enter “Panasonic Image App”
into the search box.
4 Select “Panasonic Image
App” and install it.
•
The icon will be added to the
menu.
1 Connect the iOS device to the
network.
2 Select “App Store
SM
”.
3 Enter “Panasonic Image App”
into the search box.
4 Select “Panasonic Image
App” and install it.
•
The icon will be added to the
menu.
To Next Page
Loading...
