254
Playback/Editing
Recorded motion picture can be divided in two. It is recommended for when you want to
divide a part you need with a part you do not need.
Dividing a motion picture is permanent. Decide before you divide!
1 Select the menu.
2 Press 2/1 to select the motion picture to divide, and then press [MENU/SET].
•
With [MP4] motion pictures, the order of pictures will change if divided.
It is recommended to search these motion pictures by using Calendar Playback (P239) or
[Video Only] in the [Playback Mode].
Not available in these cases:
•
Avoid trying to divide motion picture near the very beginning or end of the motion picture.
• You cannot use [Video Divide] for the following pictures.
– Motion pictures with a short recording time
[Video Divide]
[MENU] > [Playback]>[Video Divide]
3 Press 3 at the location to divide.
•
Motion picture is played back from the same location when
3 is pressed again.
• You can finely adjust the location for division by pressing 2/
1 while the motion picture is paused.
4 Press 4.
•
Confirmation screen is displayed. It is executed when [Yes] is selected.
Exit the menu after it is executed.
• Motion picture may be lost if the card or battery is removed while processing the dividing.
To Next Page
Loading...
