166
Focus and Exposure Settings
Compensating the Exposure
Applicable modes:
Use this function when you cannot achieve appropriate exposure due to the difference in
brightness between the subject and the background.
1
Press the rear dial to switch to Exposure
Compensation operation.
2
Rotate the rear dial to compensate the
exposure.
A Exposure Compensation value
B Flash Adjust
• You can switch the functions between the rear dial and the front dial by pressing [DISP.].
• The Exposure Compensation value can be set within a range of j5EV to i5 EV. When
recording motion pictures, the Exposure Compensation value can be set within a range
of j3 EV to i3EV.
• Select [n0] to return to the original exposure.
3
Rotate the front dial to adjust the flash output.
• This operation is possible only when [Auto Exposure Comp.] (P223) in [Flash] in the
[Rec] menu is set to [ON] and [Firing Mode] (P224) in [Flash] is set to [TTL].
• Flash output can also be adjusted using [Flash Adjust.] in [Flash] in the [Rec] Menu.
(P223)
Underexposed
Properly
exposed
Overexposed
Compensate the exposure
towards positive.
Compensate the exposure
towards negative.
+1+1
+1+1 +2+2 +3+3 +4+4 +5+5
-
5
-
5
-
4
-
4
-
3
-
3
-
2
-
2
-
1
-
100
0
To Next Page
Loading...
