167
Focus and Exposure Settings
• When [Auto Exposure Comp.] in [Flash] in the [Rec] menu is set to [ON], the brightness of the
built-in flash will automatically be set to the level appropriate to the selected Exposure
Compensation. (P223)
• When the exposure value is out of the j3EV to i3 EV range, the brightness of the recording
screen will no longer change. It is recommended to record by checking the actual brightness of
the recorded image in the Auto Review or playback screen.
• The set exposure value is memorised even if the camera is turned off.
Not available in these cases:
•
The compensation range of the exposure will be limited depending on the brightness of the
subject.
To Next Page
Loading...
