255
Playback/Editing
This function allows you to create a motion picture from a picture group recorded with
[Time Lapse Shot]. The created motion picture is saved in MP4 recording format.
1 Select the menu.
2 Select the [Time Lapse Shot] picture group with 2/1 , and then press [MENU/
SET].
3 Select items and settings.
4 Select [OK] with 3/4, and then press [MENU/SET].
•
Confirmation screen is displayed. It is executed when
[Yes] is selected.
Exit the menu after it is executed.
• If you select an image quality in which the aspect ratio is different from the one for the picture
group, black strips will appear on the top and bottom or left and right of the image.
• If a recorded image quality with a resolution higher than the group pictures has been selected,
the image will become blurry.
• When creating motion pictures, we recommend you use the sufficiently-charged battery or the
AC adaptor (optional).
• If power supply is lost by unplugging the AC adaptor or due to a blackout while creating a
motion picture with the AC adaptor, the motion picture you are creating will not be recorded.
• A motion picture that exceeds the recording time of 29 minutes and 59 seconds and a motion
picture that exceeds the file size of 4 GB cannot be created.
• A motion picture shorter than 1 second is displayed as “0s” on the motion picture recording time
(P77).
•
If only one picture was taken with [Time Lapse Shot], the picture cannot be selected.
[Time Lapse Video]
[MENU] > [Playback]>[Time Lapse Video]
Item Description of settings
[Rec Quality]
Sets the quality of a motion picture.
[FHD/50p]/[FHD/25p]/[HD/25p]/[VGA/25p]
[Frame Rate]
Sets the number of frames per second. The larger the number
is, the smoother the motion picture will be.
[50fps]
¢
/[25fps]/[12.5fps]/[8.3fps]/[6.25fps]/[5fps]/[2.5fps]/[1fps]
¢ Only when set to [FHD/50p]
[Sequence]
[NORMAL]:
Splices pictures together in recording order.
[REVERSE]:
Splices pictures together in reverse recording order.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
