250
Playback/Editing
You can add text (comments) to pictures. After text has been registered, it can be stamped
in prints using [Text Stamp] (P251).
1 Select the menu.
3 Enter the text. (P61)
•
Exit the menu after it is set.
• To delete the title, erase all the text in the text input screen.
• You can print out texts (comments) using the “PHOTOfunSTUDIO” bundled software on the
CD-ROM (supplied).
• You can set up to 100 pictures at one time with [Multi].
Not available in these cases:
•
You cannot use [Title Edit] for the following pictures.
– Motion pictures
– Pictures taken with [ ], [ ] or [ ]
[Title Edit]
[MENU] > [Playback]>[Title Edit]>[Single]/[Multi]
2 Select an image to add text.
•
[’] is displayed for pictures with titles already registered.
[Single] setting
1 Press 2/1 to select the picture.
2 Press [MENU/SET].
[Multi] setting
1 Press 3/4/2/1 to select the picture and then press
[MENU/SET] (repeat).
•
The setting is cancelled when [MENU/SET] is pressed
again.
2 Press 2 to select [OK], and then press [MENU/SET]
to execute.
To Next Page
Loading...
