144
Image and Picture Quality Settings
Applicable modes:
The camera automatically removes noise that appears when the shutter speed becomes
slower to take pictures of night scenery etc. so you can take beautiful pictures.
Settings: [ON]/[OFF]
•
[Long shutter noise reduction ongoing] is displayed for the same time as the shutter speed for
signal processing.
• We recommend using a tripod when the shutter speed is slowed to take pictures.
Not available in these cases:
•
In the following cases, [Long Shtr NR] does not work:
– [Panorama Shot] (Scene Guide Mode)
– When recording motion pictures
– When [Burst Rate] is set to [SH]
– When [Electronic Shutter] is set to [ON]
Applicable modes:
When the screen periphery darkens as a result of the lens characteristics, you can record
pictures with the brightness of the screen periphery corrected.
Settings: [ON]/[OFF]
•
This feature may be automatically disabled, depending on the recording conditions.
• Noise in the periphery of the picture may stand out with higher ISO sensitivity.
Not available in these cases:
•
Correction is not possible in the following cases:
– When recording motion pictures
– Recording still pictures while recording a motion picture [only when set to [ ] (motion
picture priorities)].
– When [Burst Rate] is set to [SH].
• Depending on the lens used, [Shading Comp.] may not operate.
Refer to the website for compatible lenses.
Reducing the long shutter noise [Long Shtr NR]
[MENU] > [Rec]>[Long Shtr NR]
Correcting the brightness on the screen periphery [Shading Comp.]
[MENU] > [Rec]>[Shading Comp.]
To Next Page
Loading...
Need help?
General
Weight and Dimensions
