275
Wi-Fi/NFC
A Wi-Fi connection using NFC function is possible by touching the smartphone/tablet to
this unit, and you can easily transfer images displayed on the screen.
An image can be sent on site immediately after taking it, so you can easily send it to the
smartphone/tablet
¢
of your family or friend.
¢ Installing the “Image App” is required for use.
1 Play back the picture you want to transfer to the smartphone/tablet in the
camera.
2 Launch “Image App” on the smartphone/tablet at the transfer destination.
3 While [ ] is displayed on the connection
screen of the “Image App”, touch the
smartphone/tablet to [ ] of this unit.
•
It may take time to complete the connection.
• If a connection attempt by touching fails, restart the
“Image App”, and then display the screen in step
2
again.
• They cannot be transferred as a batch.
• Depending on the environment you are using, it may take a few minutes to complete the image
transfer.
Transferring images stored in the camera easily
Preparation:
(On the camera)
•
Set [NFC Operation] to [ON]. (P309)
• Set [Touch Sharing] to [ON]. (P310)
(On your smartphone/tablet)
•
Check that your smartphone/tablet is a
compatible model.
• Turn on the Wi-Fi function.
• Install the “Image App” in advance. (P269)
To Next Page
Loading...
