18
Before Use
There are 2 ways to operate the rear dial, rotating left or right, and deciding by pressing.
The front dial is operated by rotating it to the left or right.
Rotating:
Selection of items or setting of values is performed during the various settings.
Pressing:
Operations that are the same as [MENU/SET] button, such as determine settings,
etc., are performed during the various settings.
•
These operating instructions describe operations of the rear dial/front dial as follows:
Allows you to set the aperture, shutter speed, and other settings when in / / /
modes.
¢ Pressing the rear dial enables you to set the exposure compensation.
Rear Dial/Front Dial
e.g.: When rotating the rear dial to the left or right/
pressing the rear dial
e.g.: When rotating the front
dial to the left or right
Mode dial Rear Dial Front dial
(P89) Programme Shift
¢
Programme Shift
(P92) Aperture value
¢
Aperture value
(P93) Shutter speed
¢
Shutter speed
(P94) Shutter speed Aperture value
Displaying/not displaying the operation guide
[MENU] > [Custom]>[Dial Guide]>[ON]/[OFF]
•
When [ON] is set, the operation guide for dials, buttons, etc. is
displayed on the recording screen.
To Next Page
Loading...
